How to extend the life of your Fingerprint Scanner?

This is because Fingerprint Recognition Time Attendance also requires maintenance. Fingerprint Recognition Time Attendance is a durable consumer product. Even the best Fingerprint Scanner still requires essential maintenance measures during use. If a mobile phone is properly maintained, it will still be as clean as new after one or two years of use, and its service life will be extended. As a product with low frequency requirements, Fingerprint Recognition Time Attendance can sometimes extend its service life by 3-5 years if you pay attention to daily maintenance.

The emergence of Fingerprint Scanner has added a strong barrier to our home security. However, consumers often encounter many problems when using Fingerprint Scanner. I have already shared how to install a Fingerprint Scanner. I think everyone also wants to know how to extend the service life of a Fingerprint Scanner, so let me explain below. Introducing to everyone.
1. Regular maintenance
Keep the Fingerprint Scanner clean and tidy, regularly check the technical status of Fingerprint Recognition Time Attendance, deal with any abnormalities in a timely manner, tighten and adjust loose and out-of-order parts in a timely manner, and preventively replace some wearing parts.
2. Check the lock body
Check whether the height and height of the lock tongue and the lock plate hole are consistent. The best coordination gap between the door and the door frame is 1.5mm-2.5mm. If not, you need to adjust the position of the hinge or lock plate on the door. At the same time, pay attention to the thermal expansion and contraction caused by the weather to ensure that the clearance between the door and the door frame, the lock body and the lock plate is appropriate.
3. Clock calibration
The door lock clock is very important for the internal system of the Fingerprint Scanner. It will not affect the use of the key card. Regular inspection and timely calibration become very important. Timely calibration is the same as setting the clock. When repairing the door lock, if the power outage lasts for more than 10 minutes, the door lock clock should be reset after the repair is completed.
5. Effective maintenance
Be sure to do a good job in daily maintenance of the Fingerprint Scanner. Maintenance work is an important part of extending the service life of the Fingerprint Scanner. Keep the Fingerprint Scanner in good technical condition; use and operate the Fingerprint Scanner correctly to reduce and prevent Fingerprint Scanner failures caused by human error.
6. Add lubricating oil
As the most important mechanical structure of a door lock, the lock cylinder cannot be neglected for maintenance. If you find that the lock cylinder is not very sensitive or cannot maintain its position, you should add lubricating oil to the lock cylinder: remove the side trim panel, spray oil on the lock cylinder with an oil gun, and turn the handle and knob until the door lock stops flexibly.
I will share here how to extend the service life of Fingerprint Scanner. In addition, environmental factors in different regions will also affect the life of Fingerprint Recognition Time Attendance, such as temperature and humidity, air pressure, pollution, light, rain and snow, etc. Very big.